IMPORTANT SAFEGUARDS
Do not fill over 300ml "MAX" at any time.
Do not switch on power when the tank is empty.
Do not touch the Ultrasonic vibration plate.
Clean regularly as per Maintenance instructions to avoid malfunction.
Empty remaining water from "DRAINSIDE" of tank,and wipe with a clean dry cloth when
not in use or storage.
Essential oils can stain. In the event of a spillage or contact, please wipe the surface with a
soft cloth.
Do not fill directly from the water outlet use a filling cup.
Do not let mist blow onto furniture, clothing, walls etc.
Keep away from direct sunshine heat sources and air conditioners or fans.
Always use on a stable flat surface o not place on carpet, duvet or unstable area.
Keep away from electronic equipment, such as TV and Audio equipment.
Do not tip the product this may cause water to enter the mechanism and cause
malfunction.
Product use time: 6 hours maximum
Wait 60 minutes before reusing to avoid damage to the Ultrasonic plate.
Use tap water only. Do not use mineral water, sparkling water etc. Never move the
product when in use.
Do not touch any part of the product with wet hands.
The product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge,unless they have
been given supervision or instruction concerning use of the charger by a person
responsible for their safety. Keep cords clear of pathways,and do not pull forcefully at any
point.
If smoke or a burning smell is detected, unplug immediately.
Only use indoors.
Use only with the specified AC/DC Adapter. The adapter is designed for use from a
standard household electrical supply.
Do not attempt to connect the charger to a supply with a different voltage.
MAINTENANCE
We recommend that you clean your Aroma Diffuser every time you change oils. are
corrosive, and over time they build up on the ceramic parts. To ensure a long life for your
diffuser,follow these simple steps:
1.Rinse the water base with clean water and wipe dry with a clean cloth.
2.Use a cotton swab to gently clean the Mist Disc and Sensor.
9
