Idiomas disponibles
Idiomas disponibles
English
10. TROUBLESHOOTING
Malfunction
Compressor
not included
Excessive vibration
and noise at work
The air flow is
significantly
reduced and high
pressure pumping
not possible
Possible cause
• The power supply produces a
voltage less than 10 V
• The power supply provides a current
less than 10 A
• Blown fuse
• Overheated motor
•Worn bearing eccentric or motor
shaft
• Worn cylinder, piston ring or hose
• Worn outlet valve, piston ring or
hose
• There may be a leak in the hose
connection points
Check and replace / recharge the
power source
• Replace the fuse in accordance with
the maximum current consumption
• Put the compressor off for a period
not less than 20 minutes
• Contact an authorized service center
• Contact an authorized service center
• Check the connection of the
connector to the spindle tires, as well
as the hose connection to the
compressor.
12
Solutions
