Idiomas disponibles
Idiomas disponibles
Tool Specifications
Jigsaw
Article number
Jigsaw
Article number
Rated input
power
[W]
Output power
[W]
Stroke rate at no
load
[spm]
Stroke
[mm]
Stroke Rate
Preselection
Constant Electronic
Control
Cutting capacity, max.
Wood
[mm]
Aluminium
[mm]
in non-alloy
steel
[mm]
Bevel cuts
(left/right)
[°]
Weight according
to EPTA-
Procedure
01/2003
[kg]
Protection class
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltages and models for specific
countries, these values can vary.
Noise/Vibration Information
Measured values determined according to
EN 60 745.
Typically the A-weighted sound pressure level of
the machine is 84 dB (A). Measurement uncer-
tainty K=3 dB.
When working, the noise level can exceed
85 dB (A).
Wear hearing protection!
The typical hand/arm vibration is below 2.5 m/s
BTI-ST 135 BE
018974
BTI-ST 135 E
018972
720
310
500 – 2 800
26
135
20
10
0 – 45
2.7 (BTI-ST 135 BE)
2.6 (BTI-ST 135 E)
/ II
2
.
English - 4
Intended Use
The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ceramic
plates and rubber while resting firmly on the
workpiece. It is suitable for straight and curved
cuts with mitre angles to 45°. The saw blade rec-
ommendations are to be observed.
Machine Elements
The numbering of the machine elements refers to
the illustration of the machine on the graphics
page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 Vibration damper
2 Lock-on button for On/Off switch
(BTI-ST 135 BE)
3 On/Off switch
4 Stroke rate preselection thumbwheel
5 Vacuum hose*
6 Vacuum connection*
7 Base plate with mit interior extraction
channel
8 Sliding shoe for base plate*
9 Switch for sawdust blowing device
10 Lever for adjustment of pendulum action
11 Pushbutton for Precision Control
12 Stroke rod
13 Guide roller
14 Precision Control guide
15 Saw blade*
16 Contact protector
17 Dust cover for vacuuming*
18 SDS clamping lever for saw blade release
19 Scale for mitre angle
20 Angle gauge**
21 Thumbwheel for pre-tension of base plate
22 SDS lever for base-plate adjustment
23 Splinter guard
24 Circle cutter/parallel guide*
* Not all of the accessories illustrated or described are
included as standard delivery.
**Commercially available (not included in the delivered
items)
