Idiomas disponibles
Idiomas disponibles
3. INSTALLATION INSTRUCTIONS
3.1 Before Installation
Proceed with installation of the product according
to the instructions below. Be sure to take into
account national and local code requirements
regarding installations.
Please comply with the following:
• For the USA, The National Electrical Code, ANSI/
NFPA 70 (latest version)/State or Municipal
directives and/or regional directives.
• For Canada, The Canadian Electrical Code, C22.1
(latest version)/State or Municipal directives
and/or regional directives.
3.2 Mounting the Anti-Tip Brackets
WARNING:
If the unit cannot be secured to the
cabinetry (which in turn must be secured to
wall) to prevent tipping, make sure to use
the supplied anti-tip brackets in order to
prevent the appliance from tipping over.
WARNING:
Make sure that there is no electrical or
water connection in the adjacent cabinets
into which the mounting screws will be
screwed to secure the refrigerator.
Category
A
B
C
• Use a tape measure to mark the wall for
REF30BMB...N...
30" (762 mm)
23 5/8" (600 mm)
3 3/16" (81 mm)
WARNING:
Please remember to use the necessary
protective equipment when drilling holes in
the wall and performing the installation.
installation of the anti-tip brackets (2).
Anti-tip bracket, on the wall
REF36BMBZPNV
36" (914 mm)
23 5/8" (600 mm)
6 3/16" (157 mm)
EN
REF36FDBZPNV
36" (914 mm)
23 5/8" (600 mm)
6 3/16" (157 mm)
25
