Textron Company Greenlee CJS-100 Manual De Instrucciones página 8

Operation
1. Set the selector switch according to the Settings Table.
2. Refer to "Typical Measurements" for specific measurement instructions.
3. Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning circuit,
replace the battery.
• If the unit still does not function as expected, send the unit to Greenlee
for repair.
4. Take the reading from the circuit or component to be tested.
Settings.Table
To measure
this value ...
AC Voltage
DC Voltage
Resistance
AC Current*
To measure
this value ...
Diode
Continuity
* AC current measurements are made using the jaw. Refer to "Typical
Measurements" for specific measurement instructions.
8
Electric shock hazard:
Contact with live circuits could result in severe injury
or death.
Set the
Selector
Switch
to this This icon appears
symbol ... on the display ...
Set the Momentarily press
Selector
Switch Button until this
to this
symbol ... on the display ...
the Hold/Toggle
icon appears
Connect Connect
red black
lead lead
to ... to ...
V-Ω COM
V-Ω COM
V-Ω COM
N/A N/A
Connect Connect
red black
lead lead
to ... to ...
V-Ω COM
V-Ω COM