Common Sense Camera Care - FujiFilm instax mini LiPlay Manual De Instrucciones

Common Sense Camera Care

■ Camera Care
EN
1. Do not open the film door until you have used up the
film; otherwise, the rest of the film is exposed and
turns white. The film can no longer be used.
2. Your camera is a precision instrument. Do not get it wet
or drop it. Also, do not expose it to sand, dust or dirt.
3. Do not use a strap made for cellular phones or other
similar electronic products. These straps are usually
too weak to hold your camera securely. For safety, use
only straps designed for your camera, and use only as
specifically intended and instructed.
4. Do not use cleaning products or solvents such as those
with bleach or alcohol to remove dirt.
5. In hot weather, do not leave your camera in hot places
such as in a car or on the beach. Do not leave it in damp
places or places where weather exposure could result.
6. Moth repellent gas such as naphthalene may affect your
camera and prints. Store your camera and photo prints
in a place where exposure to harmful cleaning or other
household elements will be avoided.
7. Note that the temperature range within which your
camera can be used is +5°C to +40°C (+41°F to +104°F).
8. Take great care to ensure that printed materials do not
violate copyright, image rights, privacy or other personal
rights and do not offend public decency. Actions that
violate the rights of others, are contrary to public
decency or constitute a nuisance may be punishable by
law or otherwise legally actionable.
■ Handling the LCD Monitor
As the LCD monitor can be easily damaged, do not scratch
the surface with a solid material. To avoid the LCD monitor
8
getting damaged, we recommend you attach a protective,
clear plastic sheet (commercially available) on the monitor.
■ Charging the Battery
The battery is not charged at shipment. Charge the
battery completely before use.
Charge the battery using the supplied USB cable. Charging
times will increase at ambient temperatures below +10 °C
(+50 °F) or above +35 °C (+95 °F). Do not attempt to charge
the battery in environments with temperatures above +40 °C
(+104 °F); at temperatures below +5 °C (+41 °F), the battery
will not charge.
■ Battery Life
At normal temperatures, the battery can be recharged
about 300 times. A noticeable decrease in the length of time
the battery will hold a charge indicates that it has reached
the end of its service life.
■ Cautions: Handling the Battery
The battery and camera body may become warm to the
touch after extended use. This is normal.
■ Certification marks acquired by the camera are located
inside the film chamber.
■ Cautions During Printing
Do not shake the Do not drop the
camera while camera while
printing. printing.
Do not cover the
film ejection slot
while printing.