Idiomas disponibles
Idiomas disponibles
English
Electrical connection
Before switching the freezer on for the first time, leave it vertical for at least two hours. Then
connect the appliance's power supply lead to a mains socket with earth contact, installed in
accordance with electrical safety regulations. The rated voltage and frequency are stated on
the nameplate on back of the freezer. The appliance must be connected to the electrical mains
and earthed in compliance with the relevant regulations and requirements. The appliance is
able to withstand short fluctuations in voltage of no more than 15% less or 10% more than the
rated voltage stated on the nameplate. If the power supply lead has to be replaced, this
operation must only be carried out by a qualified technician. The socket must be accessible
after the appliance has been placed.
Product Description
1. Temperature Control
3. Bottom slide-out drawer
Before using for the first time
- Remove any exterior and interior packaging materials completely, including the adhesive
strips.
- Before it is connected to the mains, the unit must be thoroughly checked for transport
damage, including its power cord.
- Clean the unit as described in the section Maintenance and cleaning.
- To ensure proper functioning, wait for about two hours before connecting the unit and
switching it on after it has been positioned.
- When the unit is first switched on, a slight 'new' smell may be noticed. However, this will
disappear once the cooling process has begun.
Setting and selecting the freezer operating temperature
Temperature Control
The temperature in the freezer is controlled by the thermostat control regulator in the upper
the freezer. Turn the thermostat control regulator with key attached up or down to regulate
the temperature inside the freezer. The markings on control regulator indicated the "MIN,
MED and MAX" for the different temperature grades. The temperature decreases with
position MIN being the warmest and position MAX being the coldest.
Set the control to the middle position MED for normal use, but you may set the control to
other positions if you find the middle is too cold or too warm.
Important: Changes in weather conditions (temperature and humidity) and
the frequency with which the door is opened affect the freezer operating
temperatures.
2. 2 x Slide-out drawers
4. Adjustable feet
4
