Vonyx STM3400 Manual De Instrucciones página 4

REAR PANEL
1. BT ANTENNA: Socket for plugging in the supplied BT antenna.
2. 12V DC POWER SUPPLY: Only use the provided power adapter to power the unit. When (dis)connecting the power
adapter, make sure the power of the unit is off. Connect the cord to the unit first, before plugging into the mains outlet.
3. ON/OFF SWITCH: Turns the unit ON/OFF.
4. MASTER OUTPUT: RCA connectors to connect the unit to an amplifier.
5. CHANNEL 1 & 2 INPUTS: These LINE inputs can be used to connect CD/MP3 players, etc.
6. MIC INPUT: 6.3mm (¼") input jack for connecting a microphone.
7. HEADPHONES SOCKET: 6.3mm (¼") output jack for connecting headphones. This allows for pre-listening (PFL signal).
CONNECTING WITH BT
Attention: The BT distance is approx. 10 meter without any barrier.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
4
1. Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the
music. See the operating instructions for that device.
Enter "BT" mode to activate BT-function.
2.
Select "Bluetooth" on your BT-device and make the BT-connection
3.