Idiomas disponibles
Idiomas disponibles
The t clearance of output gear and rack is shown in Figure 6 below:
Warnings
1) To ensure safety, install safety stop blocks on both ends of the rails to prevent the gate from running out of the rail. Before
installing the main engine, make sure that the safety stop blocks are in place and whether it has the function of preventing
the gate from running out of the rail or safety range.
2) Please make sure that the main engine and its components have good mechanical properties, and the gate can be opera-
ted exibly when manually moved before installing the main engine.
3) Please note that for this product, one control can only drive one main engine, otherwise, the control system will be dama-
ged.
4) Earth leakage circuit breaker must be installed in where the gate movement can be seen, and the minimum mounting
height is 1.5m to avoid being touched by children.
5) After installation, please check whether the mechanical property is good or not, whether gate movement after manual
unlocking is exible or not, whether the installation for infrared sensor (optional) is correct and e ective.
Opening your life
Opening your life
Gear rack
Gear
rack
Output gear
Output
gear
8
Code:
Figure 6
www.accessmatic.com
BD850
