Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Problem
Display is not on
ID / Ful
"
" icon is on.
"
"is lighting
Dryer does not start
Degree of dryness
was not reached or
drying time too long
Warning!
！
If you cannot deal with the problems by yourself and need help:
• Press the On/Off button.
• Pull out the mains plug and call the service.
Solution
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme.
• Press the On/Off button.
• Check the water container. If it's full,
please pour out the condensate water
and restart the dryer. If the container is
not full, please restart the dryer directly.
• If the icon is still lighting after you have
finished the first two steps, please call
the service.
• Clean the lint filter.
• Connect the tumble dryer to the mains.
Turn on the tumble dryer.
• Check that the door is closed.
• Check the programme is set.
• Press the Inicio/Pausa button.
• Clean lint filter and heat exchanger.
• Empty the water container.
• Check the drain hose.
• Check installation place is appropriate.
• Keep the air inlet clean.
• Use higher drying intensity level
programme or time programme.
26
V.1
