Idiomas disponibles
Idiomas disponibles
Product Specifications
Rotary Hammer
Article number
Replacement drill chuck
Speed control
Right/Left rotation
Rated input power
Power output
Impact rate
Impact energy
per stroke
Nominal speed
Right rotation
Left rotation
Tool holder SDS-plus
Spindle collar
diameter
Number of chiselling positions 36
Maximum drill
diameter:
Masonry
(core drill)
Concrete
Wood
Steel
Weight (without
accessories) approx.
Degree of protection
Noise/Vibration Information
Measured values determined according to EN 50144.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level: 88 dB(A)
Sound power level: 101 dB(A)
Wear ear protection!
The typically weighted acceleration is 11 m/s
Intended Use
The machine is intended for hammer drilling in con-
crete, brick and stone as well as for light chiselling
work. It is also suitable for drilling without impact in
wood, metal, ceramic and plastic.
Machines with electronic control and right/left rotation
are also suitable for screw driving and thread cutting.
1 619 929 682 • (04.10) T
BTI-BH 2-24 MES
018704
G
G
G
[W] 680
[W] 390
[per min] 0 ... 4850
[J] 2.4
[RPM]
0 ... 870
[RPM]
0 ... 500
G
[mm] 43 (Euro-Standard)
[mm]
68
[mm]
24
[mm]
30
[mm]
13
[kg] 2.6
/ II
2
Product Elements
The numbering of the product elements refers to the
illustration on the foldout page.
1 13 mm Quick clamping replacement drill chuck
2 SDS-plus replacement drill chuck
3 Tool holder (SDS-plus)
4 Dust protection cap
5 Locking sleeve
6 Replacement drill chuck locking ring
7 Locking button
8 On/off switch
9 Right/Left rotation switch
10 Unlocking button
11 Operational mode selection switch
12 Auxiliary handle
13 Depth stop
14 SDS-plus adapter*
15 Front sleeve of the quick clamping replacement
drill chuck
16 Holding ring
17 Winged screw, depth stop
* Not all the accessories illustrated or described are in-
cluded in standard delivery.
.
If the cable is damaged or cut through while work-
I
ing, do not touch the cable but immediately pull the
mains plug. Never use the machine with a dam-
aged cable.
English–1
For Your Safety
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed.
Additional safety information can
be found in the "General Safety
Rules" Section in this handbook.
Before using for the first time, ask
for a practical demonstration.
Wear ear protection to prevent damage
to your hearing.
Wear safety glasses and sturdy shoes.
For long hair, wear hair protection.
Work only with close-fitting clothes.
