Idiomas disponibles
Idiomas disponibles
„ Use caution on live circuits, Voltages above 30 Vrms, 42 Vpeak or 60 Vdc pose a shock hazard.
„ Use personal protection equipment systematically.
„ All troubleshooting and metrological checks must be done by competent, accredited personnel.
1.2. INPUT LIMITS
Function
Voltage AC or DC
Frequency, Resistance, Capacitance, Continuity, Diode Test,
Temperature
Current 10 A AC or DC
Current µA/mA AC or DC
1.3. DEFINITION OF SYMBOLS
WARNING, risk of DANGER! The operator must refer to these instructions whenever this danger
symbol appears.
WARNING, risk of electric shock. The voltage applied to parts marked with this symbol may
be hazardous.
Equipment protected by double insulation.
Information or useful tip.
The product is declared recyclable following an analysis of the life cycle.
The CE marking indicates compliance with the European Low Voltage Directive (2014/35/EU),
Electromagnetic Compatibility Directive (2014/30/EU), and Restriction of Hazardous Substances
Directive (RoHS, 2011/65/EU and 2015/863/EU).
The UKCA marking certifies that the product is compliant with the requirements that apply in the
United Kingdom, in particular as regards Low-Voltage Safety, Electromagnetic Compatibility, and
the Restriction of Hazardous Substances.
The rubbish bin with a line through it indicates that, in the European Union, the product must
undergo selective disposal in compliance with Directive WEEE 2019/19/EU. This equipment
must not be treated as household waste.
Indicates the terminal(s) so marked must not be connected to a circuit where the voltage with
respect to earth ground exceeds the maximum safety rating of the meter.
This symbol indicates a potentially hazardous situation, which if not avoided, could result in
death or serious injury.
This symbol indicates a potentially hazardous situation, which if not avoided, may result damage
to the product
14
Maximum Input
600V AC/DC
600V AC/DC
10A (protected by fuse)
500mA (protected by fuse)
Battery.
Fuse.
