LIMIT VD 101 Manual De Operación página 6

4. Detection range selection
GB
a. High voltage mode is the default, with a detection range of 90-1000 V. The red
indicator light on the panel indicates this mode.
b. To change mode, short press the power button once. The red indicator light will
switch to green, and the device to low voltage mode, with a range of 24-1000 V.
The detector is more sensitive to electrical interference/noise in low voltage
mode. Please only use low voltage mode in a weak electric field environment.
BATTERY REPLACEMENT
1. When the battery voltage is lower than 2.4 V, the detector will automatically shut
down.
2. Press down the battery compartment latch to open the end.
3. Pull out the end of the detector as shown in the pictures on the right and replace
the batteries.
4