Probuilder 69370 Manual De Instrucciones página 25

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
Special safety instructions
General
Air nailers may only be used by persons over
18 years of age.
Always use the correct type of nail in the air
nailer.
Never use compressed air tools in areas
where there is risk of � re or explosion.
Compressed air supply
Compressors and compressed air tools can
be dangerous if operated incorrectly. Always
observe the compressor manufacturer's
safety instructions! Always remember
to drain the compressor tank of water
and to clean the air hose � lter. Water and
contaminants in the compressed air can
damage tools.
Do not allow the compressed air hose to
come into contact with sharp edges, heat
and oil.
Excessive air pressure will wear out tools
faster and can cause dangerous situations.
Never connect compressed air tools to a
compressed air supply with a pressure of 120
PSI or above.
Check the air supply, all hoses, connections,
nipples and adapters and that clean air is
being supplied at the correct pressure and
without leakages before use. NEVER use the
air supply and tool if this is not the case!
Never use any other pressurized gas sources,
such as oxygen or acetylene.
The compressed air system should feature a
lubrication device.
Before use
Always disconnect the air supply before
removing or switching tools or accessories.
Check that the tool is not activated before
connecting air hoses.
Use
Always use a face mask and protective
glasses when using compressed air tools in
dusty environments, as these tools can raise
dust.
Compressed air tools in use can generate
noise levels in excess of 85 dB(A). If this is
the case, always use ear protectors.
Always maintain a � rm grip on compressed
air tools during use, to avoid dropping the
tool due to sudden expected movements.
Never point the air nailer at yourself or
others.
NEVER press the safety switch in when the
gun is not in contact with the item! If the
gun discharges nails into the air, it can result
in serious injury or material damage.
Check for concealed power cables, pipes etc
in the items or surface you are going to nail.
Do not use the air nailer close to the edge
of the surface you are nailing, as the brads
can mis� re and � y/ricochet freely. Never
use the air nailer to drive in brads on top of
other brads! !
Always be aware of the location of the hose.
Sudden changes in pressure in the hose
can cause it to move with suffi cient force to
knock over people and objects, which can
cause injury or damage. Always ensure the
hose does not lie in a place where you could
easily trip over it.
Never lift or carry the compressed air tools
by their hose. Always grip the tool itself.
Disconnect the tool from its air hose when
not in use.
GB
25
loading