MPM MRK-17 Manual De Instrucciones página 23

CLEANING AND MAINTENANCE
ATTENTION! Cutting edges of blades are sharp. Danger of injury! Use them carefully!
1. Unplug the appliance before cleaning.
2. Each time before and after using, disassemble the appliance and wash its parts in warm water with
detergent, rinse and dry them thoroughly. Water used for cleaning should not be warmer than
70°C.
3. Components of the appliance (except for the housing) may be used in the washer, if the tempera-
ture is set below 70°C.
4. Periodically check the components before reassembly. If the knives of the mixing attachment (2)
get stuck or rotate with difficulty, do not use the blender.
5. Never immerse the appliance in water. Unplug the appliance and then clean the housing with damp
cloth.
6. The motor is greased and do not require additional greasing.
7. If plastic parts become dyed after grinding, e.g. carrot, wipe them with cloth with small amount of
cooking oil.
ATTENTION! Do not clean the appliance using sharp objects, abrasive pastes, solvents and other
strong chemicals - it can cause damage.
TECHNICAL DATA
Technical parameters are indicated on the product nameplate.
Length of power cord: 1.45 m
Maximum time of operation: KB Max = 30 sec.
Noise level: L
= 80 dB
WA
Proper disposal of the product (waste electrical and electronic equipment)
Marking on the product indicates that after the service-life of the product expires, it should not be dis-
posed with other type of municipal waste. Used equipment may have a negative impact on the environ-
ment and health of people due to potentially containing hazardous substances, mixtures and components.
Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may
cause a release of substances that are hazardous to the environment and health. Used equipment should
be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the
electric waste collection points, the user should contact the municipal point of electric waste collection or used
equipment processing department.
EN
23