Before The First Use; Cleaning And Maintenance - Tristar LF-4701 Manual De Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19

Before the firSt uSe

• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50/60Hz)
• Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
uSe
• It is recommended to use the unit under temperature of 5-40
relative humidity less than 80%RH.
• Take the water tank out off the unit, remove the water tank cover, and
fill the tank with clear water not over 40
• Check the water basin and make sure it is clean, then put the tank onto
the base unit carefully.
• Connect the power plug and switch on the unit by turning the control
knob to the right, the main connection lamp will illuminate. The unit
starts working. The control knob can be used to control the humitity
output.
• NOTE: never switch on the unit when there is no water in the water
basin.
o
C and a
C then put back the cover.
o

cleaning and maintenance

• Use cold boiled water or distilled water.
• Change the water in water tank weekly to keep it fresh.
• Clean the whole unit, and make sure to keep all parts of the unit dry
completely when the unit is not in use.
how to clean the filter system
• Clean the ceramic balls after use for 1000L water regularly.
• Take off the water tank and turn off the filter system from the water
tank.
• Put the filter system into the white vinegar for about 10 minutes.
• Take the filter system away from the white vinegar; shake for several
times and rinse it with clear water. Make it dry. Pack it into a polybag.
Keep it in a cool and shady place.
how to clean the base and water tank
• Put a few drops of vinegar on the surface of the base and water tank
and wait for 2-5 minutes.
• Brush off the limescale rinse the inside of the base and the water tank
with clean water.
guarantee
• This product is guaranteed for 24 months granted. Your warranty is
valid if the product is used in accordance to the instructions and for
the purpose for which it was created. In addition, the original purchase
(invoice, sales slip or receipt) is to be submitted with the date of
purchase, the name of the retailer and the item number of the product.
• For the detailed warranty conditions, please refer to our service
website: www.service.tristar.eu
Ultrasonic humidifier
EN
5
Tabla de contenido
loading

Productos relacionados para Tristar LF-4701

Tabla de contenido