Tabla de contenido
Idiomas disponibles
Idiomas disponibles
14 • ENGLISH
While cooling
ATTACHMENT:
Attachments
DC Power Cord
(Power cord for car)
12V Power
WHEN USING 12V POWER
When car power is used (DC 12V)
CC
Energy saving tips
f Choose a well ventilated installation location which
is protected against direct sunlight.
f Allow warm food to cool down first before placing it
in the device to keep cool.
f Do not open the cooling device more often
than necessary.
f Do not leave the lid open for longer than necessary.
While warming
Connector
Cold/Hot
Switch
HOT
OFF
Car Power
Socket
COLD
DC
USE AND CARE
f Do not modify the cooler/warmer in any way.
Unauthorized modification may impair the function
and/or safety and could affect the life of the
equipment. There are specific applications for which
the cooler/warmer was designed.
f Always check for damaged or worn out parts before
using the cooler/warmer. Broken parts will affect
the operation. Replace or repair damaged or worn
parts immediately.
f When the cooler/warmer is not in use, store it in a
secure place out of the reach of children. Inspect it for
good working condition prior to storage and before re-
use.
WARNING AND NOTICE
For correct operation, please read the instructions below
carefully before using the appliance. Misuse of the appliance
could cause injuries and damage to the appliance.
f Please ensure the 12V plug is disconnected from
the DC socket after the engine is turned off.
f Please unplug the 12V plug from the DC socket
when the cooler is not in use.
f Prevent any obstructions to the fan. If the fan
becomes blocked, it can ove rheat and cause fire.
Avoid covering with towels or cloths.
f Please ensure the sockets of the cords are inserted
firmly. A loose fitting can result in the cord and
12V
sockets over-heating and failing.
f Keep the appliance away from flammable items and
dampness to prevent any electrical failure and fire.
f Do not disassemble the appliance.
f Do not switch the setting from cool to warm immediately.
Change between the settings only after the cooler has
been OFF 30 minutes.
f Do not rinse your cooler in water.
f Avoid turning the cooler upside down.
f Avoid dropping your cooler.
CLEANING AND MAINTENANCE
f Switch unit off, unplug power cord and allow it to cool
or heat up to room temperature.
f Wipe the inside with a clean, damp cloth. Use a mild
soap with water if necessary. Do not use abrasive
cleaners, scrubbers or household chemicals as this
may damage the finish.
f Do not immerse the unit in water.
f It is recommended that the general condition be
examined before it is used. Keep your cooler
and warmer in good repair by adopting a program
of conscientious repair and maintenance. Have
necessary repairs made by qualified service personnel.
Tabla de contenido
