Idiomas disponibles
Idiomas disponibles
5.
Place the dump unit on the base unit by holding
the dump unit with two people as shown in the figure.
Fig.12
6.
Temporarily tighten 2 bolts at the rear of the
machine. Tighten the rest of 4 bolts securely, and then
tighten 2 bolts at the rear of the machine securely.
1
Fig.13
► 1. Bolt (front) 2. Bolt (rear)
7.
Fig.14
► 1. Cord cover
Removing the dump unit
To remove the dump unit, perform the installation proce-
dure in reverse.
Installing or removing the bucket
Optional accessory
Installing the bucket
1.
Fig.15
► 1. Bucket 2. Stay 3. Front pipe
2.
lower frame of the dump unit.
2
Fig.16
► 1. Front pipe
12 ENGLISH
Attach the cord cover.
1
Take out the bucket, stays, and front pipe from the box.
Insert the front pipe between the upper frame and
1
1
2
3
