Tabla de contenido
Idiomas disponibles
Idiomas disponibles
To set the type of cuts (beard, sideburns, neck hair, etc.)
1. Turn the appliance off.
2. Turn the round blade head to the right and remove it from the head base.
3. Fit the flat blade head, adjusting it to the guide and turn it to the left until it
is correctly in place.
4. Slide the blade along the desired cutting line without pressing on the skin
to avoid cuts.
5. Use the guide comb to adjust the trimmed hair length. Place it on the flat
blade and select the cutting level desired. The first time, we recommend
that you start with the maximum length and gradually reduce it until you
achieve the desired effect.
General care and cleaning
•
Ensure that the appliance is switched off before cleaning.
•
Do not immerse the appliance in water. Use a damp cloth to wipe the
surfaces.
•
Clean the trimming head after use with the cleaning brush provided.
•
For thorough cleaning, remove the head and rinse properly. Shake off any
excess water, let dry and replace the head on the appliance.
Technical Data
Model:
Power supply:
Conformity
This device has been tested according to all relevant current CE
guidelines,
2004/108/CE, and has been constructed in accordance with the
latest safety regulations.
Instructions for use
NT-SET.001A
1 x 1.5V AA/R6 battery
such
as
electromagnetic
English
compatibility
Directive
3
Tabla de contenido
