Idiomas disponibles
Idiomas disponibles
ADJUSTING THE CONTROLS IN TENS MODE
4. Set Control
By pressing the "Set" control, you may enter the setting you intend to make adjustments. You may start to
set the value by pressing the "Increment" and "Decrement" controls when the value is flashing.
5. Increment Control
This button controls the increase of settings. When pressing this button, the parameter will increase.
6. Decrement Control
This button controls the decrease of parameter. When pressing this button, the parameters will decrease.
7. Timer
The unit has a timer of 1-60 minutes and is Continuous. It can be adjusted by pressing the "Set" and
"Increment" or "Decrement" controls. The treatment time will countdown automatically in one-minute
increments. Its output will be shut off when time is up.
8. Low Battery Indicator
A low battery sign will show up on the liquid crystal display when it needs to be replaced as soon as
possible. The unit may continue to operate for a few more hours depending on the setting intensity level.
9. Steps to Set a TENS Program
The settings can be adjusted according to the following steps.
a. Turn on the Intensity
After the electrodes are placed firmly on the skin and the lead wires are plugged into the socket of the
device, turn the on/off control clockwise. The menu will reveal on LCD. Notice the indication of power and
function on the LCD.
b. Select a Mode
Select a mode by pressing the "Mode" control. The mode you selected will show up on the top of the liquid
crystal display. There are 5 modes of your option including – B (Burst), M(Normal), M (Modulation), SD1,
and SD2. When a TENS mode is selected, it shows "TENS" on the top of the liquid crystal display.
After a mode is selected, always press "Set" to enter the next setting, and press "Increment or "Decrement"
to adjust its value.
8
