Idiomas disponibles
Idiomas disponibles
ADJUSTING THE CONTROLS IN TENS MODE
1. Panel Cover: A lid covers the controls for selecting mode and adjusting settings. Your medical professional
may wish to set these controls for you and request that you leave the cover in place.
2. Power On/Off Switch and Intensity Controls: If both controls are in the off position, the device is switched
off. By turning the controls clockwise, the appropriate channel is switched on and the indicator of power
(CH1 or CH2) will reveal on the LCD.
The current strength of the impulses transmitted to the electrodes increases further when the control is
turned clockwise.
To reduce the current strength or switch the device off, turn the control counterclockwise to the required
setting or off-position, respectively. The controls are protected by a cap to avoid an unintentional change of
intensity.
3. Mode Control
There are 5 TENS modes(B, N, M, SD1, SD2) and 2 EMS modes (S, A) available. The mode can be selected by
pressing the "Mode" control. When a TENS mode is selected, the LCD shows "TENS" on the top. When EMS
mode is selected, the LCD shows "EMS" on the top.
7
