Idiomas disponibles
Idiomas disponibles
CAUTION: Unplug the vacuum cleaner before performing any of these steps.
Your new vacuum cleaner is circuit breaker protected
to prevent motor damage due to airflow or brush
obstruction. Should your vacuum cleaner experience an
obstruction, the circuit breaker will trip and safely turn
off the motor.
To reset circuit breaker:
1. Press the on/off switch to the off position "O" and
unplug the vacuum cleaner cord.
2. Check brush and remove any entangled objects.
Remove bottom plate to access obstruction if
necessary
(see page 12).
3. Check for airflow obstruction and remove obstruction (full bag, clog in brush head
hose, clog in wand/hose, clogged filters, etc.)
4. After removing obstruction reset the circuit breaker by pushing the reset button
and resume operation
NOTICE: Do not repeatedly reset circuit breaker button without removing
obstruction, motor failure may result and void warranty. If vacuum cleaner fails to
turn on, contact an Authorized Service Center.
For Best Performance
Keep machine and all accessories clean and in good operating condition.
Change vacuum bags and filters as recommend to maintain optimum cleaning
efficiency.
Always use genuine bags, filters and parts, as use of other products may result in
poor cleaning or filtration performance. Powr-Flite filtration products are designed
for maximum performance.
Have machine checked periodically by the retailer where you purchased your
Powr-Flite vacuum.
Store machine carefully in dry area.
For optimum cleaning performance and safety, follow your owner's manual.
(Fig. 1).
MAINTENANCE
MAINTENANCE
Thermal
Reset
15
