3.3.
Device use
Do not hit the solar panel.
Do not place the solar panel behind glass or cover it with shade, even partially.
Do not hang the solar panel upside down, plug the socket when it is not in use.
Do not allow the pump to run dry for long periods of time.
Do not lift the pump by the power cord.
Use only in fresh water.
Switching on the pump: press the on/off button to switch on the pump, the pump will run for the specified hours
(depending on the battery status) and will stop running until the battery is depleted. The battery will then go into a charging
state and when the battery reaches the starting power of the pump, the pump will start automatically.
Stopping the pump: press the on/off button to stop the pump, the pump will stop.
Charging the battery: press the on/off button to switch off the pump and charge the battery with solar energy during the
day.
Pump performance in different weather conditions:
Weather
3.4.
Cleaning and maintenance
a)
Use only non-corrosive cleaners to clean the surface.
b)
Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
c)
The device must be regularly inspected to check its technical efficiency and spot any damage.
d)
Do not leave the battery in the device if it will not be used for a longer period of time.
e)
Use a soft, damp cloth for cleaning.
f)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal spatula) because they may damage the
surface material of the appliance.
g)
Do not clean the device with an acidic substance, agents of medical purposes, thinners, fuel, oils or other chemical
substances because it may damage the device.
1. Pump turned on
2. Charging of additional solar energy
to the battery pack
A battery pack powers the pump and
full solar power charges the battery.
The pump output is maintained when
the clouds pass.
The battery pack powers the pump
and additional solar energy provides
additional power to the battery.
Performance is maintained after the
clouds have passed. The pump will
only run for a shorter time into the
evening.
The pump will only operate if the
battery is sufficiently charged. The
battery charges little or not at all, so
pump performance is not maintained.
No solar power is available, pump will
not run and battery will not charge.
1. Pump turned off
2. Full battery charging with solar
energy
The battery should fully charge within
1 day.
It will take 2 to 3 days to fully charge
the battery.
It will take several days to fully charge
the battery.
The battery will not be charged.
