Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6
Table of contents
Safety rules
General safety rules
Read and understand all in-
structions. Failure to follow all instruc-
tions listed below may result in electric
shock, fi re and/or serious personal in-
jury.
SAVE THESE INSTRUCTIONS
1) Work area safety
a) Keep work area clean and well lit. Clut-
tered and dark areas invite accidents.
b) Do not operate power tools in explo-
sive atmospheres, such as in the pres-
ence of fl ammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the out-
let. Never modify the plug in any way. Do
6
not use any adapter plugs with earthed
8
(grounded) power tools. Unmodifi ed plugs
8
and matching outlets will reduce risk of elec-
8
tric shock.
8
b) Avoid body contact with earthed or
8
grounded surfaces such as pipes, radia-
tors, ranges and refrigerators. There is an
9
increased risk of electric shock if your body is
9
earthed or grounded.
9
c) Do not expose power tools to rain or
9
wet conditions. Water entering a power tool
10
will increase the risk of electric shock.
10
d) Do not abuse the cord. Never use the
11
cord for carrying, pulling or unplugging
11
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
11
Damaged or entangled cords increase the risk
11
of electric shock.
12
e) When operating a power tool outdoors,
12
use an extension cord suitable for out-
12
door use. Use of a cord suitable for outdoor
13
use reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the infl uence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use safety equipment. Always wear
eye protection. Safety equipment such as
dust mask, non-skid safety shoes, hard hat,
or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Avoid accidental starting. Ensure the
switch is in the off position before plug-
ging in. Carrying power tools with your fi nger
on the switch or plugging in power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper foot-
ing and balance at all times. This enables
better control of the power tool in unexpected
situations.
Capítulos
Tabla de contenido
