Yealink CPW65-DECT Guia De Inicio Rapido página 3

When charging, the battery LED indicator on the CPW65 glows red. When
it is fully charged, the battery LED indicator on the CPW65 will glow green.
The CPW65 starts up automatically when charging. Or you can long tap the
Mute button on the CPW65 for 3 seconds to turn it on.
Note: If it is the first time you use the CPW65, you need to fully charge
it for normal use. If the CPW65 is not in use, we still recommend
charging it even when the battery is full.
Bind/Unbind the CPW65
CPW65 supports binding with UVC86/UVC84/AVHub. The method is as follows:
1. Insert WDD60 into the USB port of UVC86/UVC84/AVHub.
2. Open the Yealink RoomConnect software, click the UVC86/UVC84/AVHub
card, and in Device Status > Wireless expansion microphone, click Bind.
3. Put the CPW65 on the charger cradle and long press the Mute Button for 5
seconds to enter the binding mode, and the Mute LED indicator flashes yellow.
After the binding is successful, the Yealink RoomConnect software will display
that CPW65 wireless is connected.
- After the binding is successful, click Check > Device Settings > Unbind to
unbind the wireless microphone.
- Click Check > Device Settings > Add Wireless Microphone to add another
wireless microphone again.
- Click Check > Device Settings > find, and you can see the
indicator on corresponding CPW65 flashes red and green alternately.
Currently, UVC86/UVC84/AVHub supports adding up to 2 (1 pair) CPW65
wireless microphones.
LED Instruction
There are three indicators on the CPW65. The indicators display the CPW65
work status.
LED indicator on the
LED Status
Solid white
Off
:
Charger Cradle
The CPW65 is being charged.
The CPW65 is not being charged.
Mute LED
Description
E
N
L G
I
L
I
S
S
H
H
2