BabySense Max View Manual Del Usuario página 20

ENG
4.20 Parent Unit Screen ON/OFF (Audio only mode)
• Briefly press the POWER button (1) to turn the LCD screen ON/OFF
5. Maintenance
All of the following maintenance procedures should only be performed when Baby and Parent Units are unplugged and off.
• Clean the surfaces of the Baby and Parent Units with a soft, fluff-free cloth.
• Never use cleaning agents or solvents.
• If the units become dirty, use a lightly damp cloth to wipe surfaces, taking care not to allow water into any openings.
6. Troubleshooting
Problem
No reception on the Parent Unit
Interference or poor reception
Image frozen on the Parent Unit
20
Possible cause/solution
• The power adapters may not be properly connected.
• Ensure that the Baby and Parent Units are ON.
• Adjust the monitor antenna to vertical position.
• Make sure the Baby and Parent Units are not far away from each other.
• Baby and Parent Units may not be properly paired. Follow PAIRING instructions.
• Move the Baby Unit closer to Parent unit.
• Use of other 2.4GHz products, such as wireless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may
cause interference with this product, so keep the baby monitor at least 5ft (1.5m) away from these types of products
or turn them off if they appear to be causing interference.
• The Baby or Parent Units may be too close to metal objects.
• The battery power may be too low.
• Restart the Baby Unit (unplug the power adapter from the wall outlet, wait for approx. 5 seconds and plug it back into the wall
outlet).
• Reset the Parent Unit by pressing the RESET Hole (16), located at the back of the Parent Unit, under the Antenna (15).