Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
COFFEE DOSE PROGRAMMING
Measures are always programmed using the same
button; any other buttons are ignored. The pro-
grammed amount of brewed coffee can be
changed by repeating the programming.
Place the mug/cup as shown (see
TION FOR COFFEE
Lift the capsule loading lever until it locks into po-
sition to open the pod fitting compartment.
Put a Lavazza capsule into the capsule fitting
compartment.
Lower the capsule loading lever to close the pod
fitting compartment.
10
PREPARING THE COFFEE
PREPARA-
BREWING).
Press and hold one of the two coffee delivery but-
tons. After about 3 seconds, the selected key will
flash and the coffee machine will enter the pro-
gramming mode.
Once the desired amount of coffee has been ob-
tained, stop supply by releasing the button.
If the programmed measure exceeds the maximum
allowed (220 ml-7,44 oz) the machine will automat-
ically stop delivery, the delivery button will blink and
the last programmed measure will be saved in the
memory. If there is a power failure during program-
ming, the last programmed value remains in the
memory. If during a dose programming, water lack is
indicated, the machine stops the supply and the
dose being programmed won't be saved. Once
filled the water tank, repeat the dose programming
procedure.
Tabla de contenido
