Information; The Use Of Power Adaptor - Amprobe AMB-50 Manual De Uso

Information

PI = 3 minutes ~ 10 minutes reading / 30 seconds ~ 1minute reading
PI 4 or more
Standard Excellent
d) Compare Function
• Press COMP button to select compare feature. COMP symbol displays on the LCD.
• Press and
• Below is the list in sequence of the compare value: 10Me, 20Me, 30Me, 40Me, 50Me,
60Me, 70Me, 80Me, 90Me ,100Me, 200Me, 300Me, 400Me, 500Me, 600Me, 700Me,
800Me, 900Me,1Ge, 2Ge, 3Ge, 4Ge, 5Ge, 6Ge, 7Ge, 8Ge, 9Ge, 10Ge,20Ge, 330Ge,
40Ge, 50Ge, 60Ge, 70Ge, 80Ge, 90Ge, 100Ge,200Ge, 300Ge, 400Ge,500Ge, 600Ge,
700Ge, 800Ge, 900Ge
• Press and hold TEST button for 2 seconds to start the measurement.
• The NG symbol will display if the insulation resistance value is smaller than resistance value.
Otherwise GOOD symbol will be displayed.

The Use of Power Adaptor

1. Open the side safety shutter, then you will see there is a power adaptor input terminal.
2. Make sure the Meter is power off and insert the AM-50 power adaptor to the input
terminal.
3. It is highly recommeded to take out all the batteries when you are using the power
adaptor.
4. Make sure the Meter is power off when you disconnect the AM-50 power adaptor from the
Meter.
4~2
Good
buttons to set the compare value
2.0~1.0 1.0 or less
Fair
8
Bad