Ecoflam MAX 20 Serie Manual De Uso página 14

EN
Start up
­ Setting data table ­ Air regulation
The burner leaves the factory with the following calibration values:
BURNER
CODE
3146835
The settings above are basic settings. In case of operation at 60 Hz, the burner must be recalibrated by closing the air shutter so as to
reduce the amount of incoming air.
A
A
MIN
14 www.ecoflam­burners.com
NOZZLE
gph Type spry
4,0 DELAVAN 60°B
B
MAX
PUMP BURNER
PRESSURE OUTPUT
bar kg/h
13 18,7
FIRING HEAD AIR DAMPER
SETTING SETTING
Pos.
N.A.
Air damper setting (A).
Unscrew the fixing screw with the hexago-
nal spanner:
• turn the air damper clockwise, to reduce
output.
• turn the air damper counterclockwise
, to increase output.
Reached the desired value to fix the
screw.
Firing head setting (B).
To act on the screw in figure:
• turn Allen key till you reach the
requested value (index 0-5).
420011054800
Pos.
7,3