Resumen de contenidos para Truper Expert MADE-20NX
- Página 1 Instructivo de 20 kg 1600 W Demolition Hammer Applies for: Code Model 100893 MADE-20NX MADE-20NX Read this manual thoroughly CAUTION before using the tool.
- Página 2 Parts Assembly Keep this manual for future references. Adjustments The illustrations in this manual are for reference only. They might be different from the real tool. Start up Operation Maintenance Authorized service centers Warranty policy MADE-20NX ENGLISH...
- Página 3 Technical Data MADE-20NX Code 100893 Description 20 kg Demolition hammer Voltage 127 V~ Frequency 60 Hz Current 15 A Power Impact energy 1 600 W 55 Joules Weight 20 kg Tool holder HEX 1 ” Work cycle 50 min work per 20 min rest. Maximum 6 hours per day Conductors 16 AWG x 2C with insulation temperature of 221 °F...
- Página 4 General power tool safety warnings WARNING! Read carefully all safety warnings and instructions listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references.
- Página 5 Safety warnings for the use of Demolition Hammers Choose the appropriate drill or attachment While operating the demolition hammer CAUTION • The tool is designed to work with bits CAUTION • Hold the tool by its handle and by or accessories with 1 1/8" HEX shanks. Choose the the auxiliary handle.
- Página 6 Parts Non-skid TRUPER Vibration Control handle Ventilation slots Switch Auxiliary handle Aluminum head Retaining lever Cable protector Power cord Tool holder Assembly CAUTION To prevent accidents, confirm that the switch is off and disconnect the plug from the power supply. WARNING Wear gloves whenever you change accessories.
- Página 7 Assembly ACCESORIES WITH SHOULDER (F) • Move the retention lever towards the bottom of the fastener until it exceeds the axis of the tool, as shown in the image (G). • Insert the accessory into the fastener. • Return the lever toward the accesory to lock it (H). •...
- Página 8 Start up ON AND OFF • To turn on the demolition unit, press “ I ” on the switch. • To turn it off press “O” on the switch. Operation • Hold the tool firmly with both hands. • Turn it on and apply light pressure to it to prevent kickback. •...
- Página 9 Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-8737 to get information about the nearest Service Center.
- Página 10 Model Brand 100893 MADE-20NX This product is guaranteed for 3 years. To make the warranty valid or purchase parts and components you must present the product in Corregidora 22, Col. Centro, Alc. Cuauhtémoc, CDMX C.P. 06060 or at the establishment where you purchased it, or at any Truper Service Center listed in the annex to the warranty ®...