Eden ED-7007 Manual De Usuario página 11

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
The unit
The doors or windows
doesn't
are not closed.
cool
There are heat
enough.
sources inside the
room.
Hot air exhaust hose
is not connected or
blocked.
Temperature setting
is too high.
Air inlet in blocked.
Auto
Heating protection,
Power-Off
when the temperature
in heating
at the air outlet
mode.
exceeds 70 degrees,
the unit will power off
automatically.
Noisy.
The ground is not
level or not flat
enough.
The sound comes
from the flowing of the
refrigerant inside the
air conditioner.
E0 Code. •
Room temperature
sensor failed.
E2 Code. •
Water tank full
Make sure all the
windows and doors are
closed.
Remove the heat sources
if possible.
Connect or clean the hot
air exhaust hose.
Reset the temperature.
Clean the air inlet.
Allow room temperature
to cool before re-starting
the unit.
Place unit on a flat, level
ground if possible.
Replace room
temperature sensor.
Please empty the water
tank.
THE PRODUCT OR EQUIPMENT CONTAINS
FLUORINATED GREENHOUSE GAS.
Art.nr.
Coolant:
Quantity in kg:
Global Warming Potential:
Art.nr.
Coolant:
Quantity in kg:
Global Warming Potential:
ENVIRONMENT
This appliance should not be put into the domestic garbage at
the end of its durability, but must be offered at a central point for the
recycling of electric and electronic domestic appliances. This symbol
on the appliance, instruction manual and packaging puts your
attention to this important issue. The materials used in this appliance
can be recycled. By recycling of used domestic appliances you
contribute an important push to the protection of our environment.
Ask your local authorities for information regarding the point of
recollection.
Instruction manual
ED-7007
R290
0,14
3
ED-7009
R290
0,16
3
EN
11
loading

Este manual también es adecuado para:

Ed-7009