Samsung RF33H Serie Manual De Usuario página 29

Using the E-SMART Function
The E-SMART function enables you to control and
monitor your E-Smart refrigerator remotely for your
convenience using your Samsung smart phone.
• To use the E-SMART refrigerator
functions, you have to install the
Samsung E-Smart app first.
• The app supports indoor control only.
E-Smart Features
1. Operational Status, User Settings & Messages
• You can view the freezer and fridge temperature
settings.
• You can receive an alarm when the freezer or
fridge door is open for 2 minutes.
• You can check the DR and the Override status.
• You can check the operational condition of the
ice maker in the freezer.
• The door-open alarm indicator appears on the
status bar of the top area of your mobile phone.
2. Remote Management
• Power Freeze Setting: You can activate the
Power Freeze function remotely.
• Power Cool Setting: You can activate the Power
Cool function remotely.
• Ice On/Off Setting: You can set the Ice On/Off
Setting function remotely.
3. Energy Consumption Reporting
• Shows the accumulated power consumption.
(Power consumption data is updated every 10
minutes.)
The energy consumption report may differ
from the power consumption specifications
of the product depending on the operating
environment and the type and quantity of
food in the fridge.
DA68-03013A-18.indb 29
4. Delay Defrost Capability
• The Delay Defrost Capability function saves
energy by delaying the defrost operation to a
time specified by the user.
You can configure the time, and this function
will save energy during the specified period in a
24 hour cycle. If the time is not set, the function
works with the default time settings.
The default time settings are below:
- 6 am to 10 am: 1st. November ~ 30th. April
- 3 pm to 7 pm: 1st. May ~ 31th. October
Provision FOR Open Access to the
Connected Product Requirements
1. SGIP Open Standards (Smart Energy Profile 2.0
- http://www.csep.org/)
• Energy Consumption Reporting
• Demand Response
2. Samsung OPEN API
• Operational Status, User Settings & Messages
- ICE Maker Status: GET /external/
icestatus?icegetstatus=opt (relevant to the
energy consumption of the product 1)
- Door Open Alarm: GET /devices/0/
Door?type=opt (relevant to the energy
consumption of the product 2)
- DR Status: GET /external/drlc?drgetstatus=opt
• Delay Defrost Capability
- Set Schedule of the Defrost Delay: POST /
devices/0/defrost/addSchedule
- Get Schedule of the Defrost Delay : GET /
devices/0/defrost/getSchedule
- Delete Schedule of the Defrost Delay: POST /
devices/0/defrost/delSchedule
- Defrost Delay On/OFF: PUT /devices/0/defrost/
delayevent.
English - 29
2018. 7. 9. 4:39