Velleman CCTVPROMT1 Guía Rápida página 8

SCHEDULE
SETTINGS
* For selected modes only
7. Hardware Overview
7.1 Front Panel

LED indicators
: DVR is powered on.
o
: HDD is reading or recording.
o

1–4: Press the channel number buttons to select the channel to display.

: Press to show the 4-channel display mode.

SEQ: Press to show all screens sequentially in full screen mode. Press again to quit.

P.T.Z. ( + SEQ): Press

SLOW: In playback mode, press to play the recorded file slowly.

ZOOM: Press to enlarge the image of the selected channel (in FRAME or FIELD recording mode).

AUDIO (SLOW + ZOOM): Press SLOW + ZOOM at the same time to select live or playback audio from audio
channel 1-4.
: live audio from audio channel 1-4 (indicated in white)
o
: playback audio from audio channel 1-4 (indicated in yellow)
o
: audio channel unselected.
o

PLAY: Press to playback the latest recorded data.

LIST (Event List Search): Press to quickly search the recorded files by event lists: RECORD / MOTION /
ALARM / TIME / HUMAN DETECTION / IVS / STATISTIC, or select FULL to show all the event logs.
To quickly search the time you want, select QUICK SEARCH. For more details, refer to the full user manual.

MENU: Press MENU to enter the main menu.

ENTER: Press ENTER to confirm the setting.
 : Press ▲ / ▼ / ◄ / ► to move up / down / left / right.
In playback mode:
Press  to pause playback.
o
Press  to stop playback.
o
Press  to fast forward.
o
Press  to fast rewind.
o

: USB port to connect a USB mouse for mouse control

: USB port to connect a USB flash drive for video backup.
Note: Do not connect two USB mice or two USB flash drives simultaneously.
Note: For a list of compatible USB flash drives, please refer to the appendices in the full user manual.
7.2 Rear Panel

INPUT (1–4): Connect to the video connector of a camera.
Note: The DVR will automatically detect the video system of the camera; make sure that the cameras are
properly connected to the DVR and powered on before the DVR is turned on.

VIDEO OUT: BNC.

AUDIO IN (1): Connect to the audio connector of a camera if the camera supports audio recording.
Note: To make a video backup with audio, make sure the camera which supports the audio function is
connected to the video-in channel and audio-in channel. For example, the audio data from audio channel 1
will be recorded with the video data from video channel 1.

AUDIO OUT (1): Mono audio output to connect to a speaker.
V. 01 – 25/02/2016
CCTVPROMT1
RECORD
DETECTION
ALARM IN
ALARM OUT
PUSH VIDEO
BUZZER
+ SEQ at the same time to enter or exit the PTZ control mode.
8 ©Velleman nv