Idiomas disponibles
Idiomas disponibles
Turn on the appliance on the POWER button on the back side of the appliance. The cooler and the heater
are now ready to work. A buzzer will be heard.
Mode of heater
Please find the lever switch on the side panel, pull this switch to "Heater".
Press the POWER key to turn on the appliance. When the appliance is turned on, the power is
1000W.
To adjust the power to 2000W, please press key "Heating" or "Heat" in the remote control.
To turn off the appliance press again the POWER key. The fan will continue working for 2 more
minutes until shut off completely.
Heat
Press this key, the corresponding power changes by pressing repeatedly. When the light is illuminated the
power in on MAX, when the power is lower the light is off.
Fan Speed
This key is not available for heater. It was settled automatically as "LOW".
Fan type
This key is not available for heater. It was settled automatically as "NORMAL WIND".
Swing
By pressing this key the wind direction can swing flatly and the swing indicator light is on. To cancel this
function, press again this key. You also can swing the blades transversely manually, by choosing the wind
direction up and down.
Timer
Press this key to choose the timer from 0.5 to 7.5 hours with steps of 0.5 hours. The appliance shuts down
automatically when the timer finishes.
Cooling
This key is not available for heating function.
Ensure that the fan is switched off from the supply mains before removing the air filter screen.
Clean the air filter screen
Remove the air filter screen from appliance and clean it with neutral detergent and a soft brush, then rinse
it with clear water. Finally, reinstall it into the appliance.
USING AS AIR HEATER
CLEANING AND MAINTENANCE
31
