MEI AC 2980 H Manual De Instrucoes página 29

Castors assembly
Place the appliance on a flat surface, remove the wrench from the foam box and assemble the castors.
Turn on the appliance on the POWER button on the back side of the appliance. The cooler and the heater
are now ready to work. A buzzer will be heard.
Cooling mode

Please find a lever switch on the side panel, pull this switch to "Cooler".

Press the POWER button to turn on the appliance. To turn it off press again this key.
Speed
Press this key, and the corresponding function changes as follows when you press the key serially: LOW;
MEDIUM; HIGH.
NOTE: The heater only works with low speed fan.
Fan type
Press this key to choose between normal wind, natural wind and sleeping wind circularly.
NOTE: heater doesn't have this function.
 Normal wind
Steady fan speed.
 Natural Wind
Variable fan speed, similar to natural breeze.
 Sleeping Wind
Low fan speed.
Swing
By pressing this key the wind direction can swing flatly and the swing indicator light is on. To cancel this
function, press again this key. You also can swing the blades transversely manually, by choosing the wind
direction up and down.
Timer
Press this key to choose the timer from 0.5 to 7.5 hours with steps of 0.5 hours. The appliance shuts down
automatically when the timer finishes.
ASSEMBLY
USING AS AIR COOLER
29