Idiomas disponibles
Idiomas disponibles
Stand Alone
ENTER
TIMER MODE (Timer)
Timer mode makes it possible to manually configure the fog discharge of the device using values of 1% to 100%, as well asthe output
duration and the interval at which the discharge is to begin. You can access the options menu by pressing MODE. Using the UP and DOWN
control keys, now select the "Timer" menu option and confirm via ENTER. Now select between "Timer Pump" (output quantity), "Timer
Duration" (output duration), and "Timer Interval" (output interval) via UP and DOWN, confirm with ENTER, and set the desired value using UP
and DOWN respectively. Confirm each entry via ENTER.
ENTER
Timer
UP/DOWN
SLAVE MODE (Slave)
You can access the options menu by pressing MODE. Using the UP and DOWN control keys, now select the "Slave" menu option and confirm
via ENTER. Connect the slave and master unit (same model, same software version) using a DMX cable (Master DMX OUT - Slave DMX IN),
and activate Stand Alone or Timer mode on the master unit. The slave unit will now follow the master unit.
Slave
ENTER
DEVICE SETTINGS (Settings)
You can access the options menu by pressing MODE. Using the UP and DOWN control keys, now select the "Settings" menu option (note
arrow) and confirm via ENTER.
Settings
ENTER
This will take you to the submenu for setting the following submenu options (select via UP and DOWN, confirm via ENTER, change status via
UP and DOWN, confirm via ENTER):
8
ENTER
Stand Alone
UP/DOWN
Pump
Timer
/
Pump
ENTER - UP/DOWN
ENTER - UP/DOWN
Pump Value
1% - 100%
ENTER
Main display
Slave mode
Pump Value
1% - 100%
Timer
/
Duration
ENTER - UP/DOWN
Duration Time
Interval Time
1sec - 60sec
1sec - 60sec
ENTER
Main display
Stand Alone mode
ENTER
Pump Value: x%
Main display
Timer mode
Timer
Duration/Interval xSec
Interval
ENTER
