Table of contents - Part 1
1.1
General information .................. 3
1.2
Scope of delivery ...................... 3
1.3
Conventional use ...................... 3
1.4
Technical data .......................... 3
1.5
Components............................. 3
1.6
Transport ................................. 4
1.7
Maintenance............................. 4
1.8
Compressor inspections ............. 4
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1
General information
Observe the safety instructions!
Read the Instruction Manual!
1.4
Technical data
Suction capacity
Filling capacity
Voltage
Electric protection, delayed-action
Motor output
Max. operating speed
Compression final pressure
Switch-on pressure
Vessel capacity
Maximum permissible working overpressure of vessel
1
Oil quantity
L
Sound power level according to DIN EN ISO 3744 (RL 2000/
WA
14/EC)
L
Sound pressure level at distance of 4 m
PA4
Overall dimensions: width x depth x height
Weight
Max. number of switching cycles
Operation/Downtime ratio
Min. distance to wall
Ambient temperature
1.
Initial filling: mineral oil up to 10 °C. Under 10 °C, use fully synthetic oil.
1.5
Components
01
Compressor unit
02
Intake filter
03
Oil dipstick
04
Oil drain screw
Note: Read and memorise part 2 of the in-
struction manual!
Subject to technical modifications. Illustra-
tions may deviate from the original.
1.2
Scope of delivery
– Compressor with instruction manual
– Documents accompanying compressed air
vessel
1.3
Conventional use
The compressor is designed for generating
and storing compressed air only. Com-
pressed air is only suitable for compressed
air tools/devices/machines.
Any other type of use is considered contrary
to the intended use.
492 x 490 x 825 mm
06
Connecting hose
07
Check valve
08
Vessel
09
Condensate drain valve
10
Pressure switch with ON/OFF switch
GB
CPM 342-10-20 W
342 l/min
265 l/min
230 V
16 A
2.2 kW
1465 rpm
10 bar
8 bar
20 l
11 bar
0.72 l
94 dB(A)
74 dB(A)
49.5 kg
10 1/h
60:40 --
40 cm
5-35 °C
I/3