Safety Messages To Maintenance Personnel - Federal Signal 27XL-024-4 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Safety Messages to Maintenance Personnel

Listed below are some important safety instructions and precautions
you should follow:
Read and understand all instructions before maintaining or operat-
ing this system.
EXPLOSION HAZARD
may impair suitability for Class 1, Division 2.
EXPLOSION HAZARD
the circuit is live or unless the area is known to be free of
ignitable concentrations.
Any maintenance to the light system must be done with power
turned off.
Any maintenance to the light system must be performed by
a trained electrician in accordance with NEC Guidelines and
local codes.
Never alter the unit in any manner. Safety in hazardous loca-
tions may be endangered if additional openings or other altera-
tions are made in units specifically designed for use in these
locations.
The nameplate, which may contain cautionary or other infor-
mation of importance to maintenance personnel, should NOT
be obscured in any way. Ensure that the name-plate remains
readable when the housing's exterior is painted.
If the glass dome is damaged in any way it MUST be replaced.
After performing any maintenance, test the light system to
ensure that it operates properly.
Failure to follow all safety precautions and instructions may result
in property damage, serious injury, or death.
Installation and Maintenance Manual
Substitution of any component
Do not disconnect the light while
Model 27XL-024-4
11
Tabla de contenido
loading

Tabla de contenido