Idiomas disponibles
Idiomas disponibles
28 OPERATION
Timer On/Off
The Lower Timer On/Off serves as an extra timer in
the kitchen that beeps when the set time has run out.
It does not start or stop cooking.
The Timer On/Off feature can be used during any of
the oven control functions.
Setting the Timer
1
Press Timer On/Off. 0:00 with HR inside it
appears and Timer flashes in the display.
2
Press plus(+) or minus(-) to select the desired
time. Plus(+) increases the time and minus(-)
decreases the time.
3
Press Timer On/Off or Start to start the Timer.
The remaining time countdown appears in the
display.
4
When the set time runs out, End shows in the
display. The indicator tones sound every
15 seconds until Timer On/Off is pressed.
NOTE
• If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
• Press Timer On/Off twice to set the time in
minutes and seconds.
• Press Timer On/Off once to set the time in
hours and minutes.
Cancelling the Timer
1
Press Timer On/Off once.
The display returns to the time of day.
Wi-Fi
The Wi-Fi button is used to connect the appliance to
a home Wi-Fi network.
1
Press Upper CLEAR/OFF and Lower CLEAR/
OFF.
2
Press and hold Timer On/Off for 3 seconds.
3
The power-on chime sounds, Set appears in the
display, and the Wi-Fi icon (
4
Register the appliance on the Wi-Fi network
using the smart phone app. (See page 40.)
5
To disconnect the appliance from the network,
delete it from the registered appliances in the
app.
) blinks.
Settings
Press and hold Start Time for three seconds.
Then press the Start Time key repeatedly to toggle
through and change oven settings.
The Setting key allows you to:
• set the hour mode on the clock (12 or 24 hours)
• enable/disable convection auto conversion
• adjust the oven temperature
• activate/deactivate the preheating alarm light
• set the beeper volume
• switch the temperature scale between Fahrenheit
and Celsius
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset the
clock to 24-hour mode, follow the steps below.
1
Press and hold Start Time for three seconds.
2
Press plus(+) or minus(-) to set the desired
hour mode on the clock.
3
Press Start to accept the desired change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically converts the
standard recipe temperature entered to a convection
temperature by subtracting 25 °F / 14 °C. This
auto-converted temperature shows on the display. For
example, select Conv. Bake, enter 350 °F, and 325 °F
shows on the display after preheat.
Convection Auto Conversion is enabled by default. To
change the setting, follow these instructions.
1
Press and hold Start Time for three seconds.
Then press Start Time repeatedly until Auto
appears in the display
2
Press plus(+) or minus(-) to enable or disable
the feature.
3
Press Start to accept the change.
