ECOVACS ROBOTICS DEEBOT R96 Manual De Instrucciones página 14

3. Operating and Programming
Install Side Brushes
2
Attach Side Brushes to the bottom of
DEEBOT by pressing a brush into each slot
with the matching color until it clicks.
Power ON
3
Open the Top Cover. Move the Power
Switch to the "I" position. The Control Panel
illuminates, DEEBOT plays a musical
tune and the AUTO Mode Button flashes.
DEEBOT is powered ON when the AUTO
Mode Button stays illuminated.
4 Charge DEEBOT
Place DEEBOT on the Charging Dock
making sure the Charging Contacts on
DEEBOT and the Charging Dock Pins make
a connection.
Please make sure the Power Switch is turned ON before charging. ("O" indicates OFF and "I"
*
indicates ON).
Charge DEEBOT for at least 4 hours before the first use. The AUTO Mode Button flashes
*
when charging, and goes out when DEEBOT is fully charged. Press the AUTO Mode Button
on the robot or press any button on the App screen to wake up the robot.
Remove the Advanced Wet/Dry Reservoir before charging DEEBOT.
*
12
EN