Idiomas disponibles
Idiomas disponibles
6. Line up the 2 holes in the top of left front trim J with the left side of
upper front trim K. Insert and tighten 2 screws (c) through the two
holes of the left front trim J to attach the two trim pieces.
Line up the 2 holes on the left side of the lower front trim L with the
bottom of the left front trim J. Insert and tighten 2 screws (c) through
the two holes of the lower front trim L to attach the two trim pieces.
Line up the 2 holes in the top of right front trim M with the right side
of upper front trim K. Insert and tighten 2 screws (c) through the two
holes of the right front trim M to attach the two trim pieces.
Line up the 2 holes on the right side of the lower front trim L with the
bottom of the right front trim M. Insert and tighten 2 screws (c)
through the two holes of the lower front trim L to attach the two trim
pieces.
7. Insert and tighten 15 cam lock dowels (a) into the trim assembly
constructed in step 6. Line up and insert the dowels in the trim
assembly into the holes in the front of the constructed media
console. Insert 15 cam locks into the media console. Turn the cam
locks in the media console to the trim assembly into place. Be careful
not to overtighten and break the cam locks or dowels.
8. Place back panels N, O and P with the finished side facing into the
mantel. Insert and tighten 33 screws (d) into the back panels N, O
and P to attach them securely to the mantel.
All manuals and user guides at all-guides.com
AA
CAM LOCK DOWEL
BB
CAM LOCK
CC
MOUNTING PEG
FLAT HEAD SCREW
DD
(4*15mm)
EE
FLAT HEAD SCREW
(4*25mm)
FLAT HEAD SCREW
FF
(3*12mm)
K
J
L
Hardware Used
c
25mm Screw
FLAT HEAD SCREW
DD
(4X25mm)
Hardware Used
a
Cam Lock Dowel
28
CAM LOCK DOWEL
AA
b
Cam Lock
CAM LOCK
BB
28
8
16
5
Hardware Used
34
d
12mm Screw
FLAT HEAD SCREW
DD
(3*12mm)
M
x 8
x8
x 15
x15
x 15
x15
N
O
P
x 33
x33
5
