Troubleshooting
If you experience the following problems while using the player, this
troubleshooting guide can help you.
No sound
•
Make sure that the player is connected securely to the TV or
amplifier.
•
Make sure that the volume of the headphone is set to MIN
when using headphones.
•
Make sure that you operate the TV or amplifier correctly.
•
Make sure that you have selected the DVD player position on
the amplifier.
No image
•
Make sure that the player is connected securely to the TV.
•
Make sure that you operate the TV correctly.
•
Make sure that you set the color system correctly.
Bad sound quality
•
Make sure that the audio output mode is set correctly.
•
Make sure that the audio connection between the player and
amplifier is correct.
Disc cannot be played
•
Make sure that there is a disc in the player.
•
Make sure that the disc is placed on the disc tray correctly, with
the label side up.
•
Make sure that the disc is clean.
•
If moisture has condensed in the player, remove the disc and
leave the player on for about one hour.
Remote control does not work
•
Remove barriers between the remote control and the player.
•
Point the remote control at the remote control sensor of the
player.
•
Replace the batteries with new ones.
Image rolls and has no color
•
The color system of the player does not match with that of TV.
Select the correct TV TYPE until TV shows normal color.
36
Insignia NS-PDVD10 10.2" Personal DVD Player
www.insignia-products.com