Kohler Cabriole Rite-Temp K-T14642 Guia De Instalacion página 8

Valve Stem
Faceplate
Correct Handle Alignment
4. Install the Faceplate and Handle
CAUTION: Risk of product damage to the K-306–KS valve
assembly. When using this valve in a fiberglass or acrylic
installation, use the Thin Wall Installation Kit (88526).
Remove and discard the plaster guard and/or dome, if installed.
Rotate the valve stem fully counterclockwise.
Install the faceplate onto the valve. Secure with two screws. Do
not overtighten.
Install the graphics ring to the faceplate, and rotate it clockwise to
lock it in place.
Press the handle over the stem extension. Lever handles should
point down.
Secure the handle in place with the setscrew.
Press the plug button in place.
1013422-2-B
Discard plaster guard with dome.
Screws
Graphics Ring
Stem Extension
Screw
Sleeve
Setscrew
Plug Button
8
Handle
Kohler Co.