Idiomas disponibles
Idiomas disponibles
Applications
The Peavey PV 118D has a variety of applications for bass augmentation of the PV
speakers, among others.
B O T T O M p a n e l
FUSE
The unit is AC power line fuse protected from overloads and fault conditions with a fast-blow 3.15 Amp fuse. This fuse
is located within the enclosure. If the fuse fails, THE FUSE MUST BE REPLACED WITH THE SAME TYPE AND VALUE IN
ORDER TO AVOID DAMAGE TO THE EQUIPMENT AND TO PREVENT VOIDING THE WARRANTY. If the unit blows a fuse, it
should be taken to a qualified service center for repair.
IEC POWER CORD CONNECTION
1
This receptacle is for the IEC line cord (supplied) that provides AC power to the unit.
It is very important that you ensure the PV 118D has the proper AC line voltage supplied.
You can find the proper voltage for your PV 118D printed next to the IEC line (power) cord on the rear panel of the unit.
Please read this guide carefully to ensure your personal safety as well as the safety of your equipment.
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet used does not have a
ground pin, a suitable grounding adapter should be used and the third wire should be grounded properly. To prevent
the risk of shock or fire hazard, always be sure that the mixer and all other associated equipment are properly
grounded.
ON-OFF SWITCH
2
This rocker switch supplies AC power to the PV 118D when switched to the ON position.
1
, PR
and SP
series of Peavey
®
®
®
2
