Idiomas disponibles
Idiomas disponibles
AIR 35
ASSEMBLING
1. Open the package and take out the air cooler .
2. Draw out the water tank 1/3, pour clean water into the tank.
Please pay attention to the water lever.
Pour into the water over min level but no more than max Level.
To en-have the cooling effect, you can put the ice box into the tank (after some hours in freezer).
Attention: cut the power when you pour the water into the tank.
OPERATIONS
OFF – To turn OFF the appliance.
SPEED CONTROL- Turn the left knob to increase or decrease the speed. Speeds vary between 1 – 2 – 3.
COOL- Select the COOL function to start the cooling system. Make sure the water tank is properly filled
with water.
SWING – Select the function SWING, to change the wind direction. The vertical diercction of the air flow
can be adjusted manually by redirecting the outlet up or down.
SWING COOL – Combines both COOL function and SWING function.
THE USE OF ICE BOX
Using methods:
a) Add water to the ICE BOX , make sure you don't exceed the MAX. Then put it into the refrigerating
chamber to ensure a frozen effect..
b) Place the ICE BOX into the water tank or upper tank.
c) There are two ICE BOXES, can use circularly.
CLENNING AND MANTENANCE
1. Clean the air filter screen
Unplug the power plug, remove the upper screws of the filter to remove the air filter. Clean the air filter
screen with neutral detergent and banister brush. Then clean it with clear water and reinstall to appliance.
2. Clean the wetted pad
11
