Idiomas disponibles
Idiomas disponibles
Before You Call
TROUBLESHOOTING
GUIDE
CONCERN
Appliance does not
run.
Appliance runs too
much or too long.
Interior
temperature is
too cold.
Interior
temperature is
too warm.
냉동고_CUF154WD1W 외~(EN+ES)_Menards.indd 14
Before calling for service, review this list. It may save you time and
expense. This list includes common occurrences that are not the
result of defective workmanship or materials in this appliance.
1. Unit is plugged into
POTENTIAL CAUSE
a circuit that has a
ground fault interrupt.
2. Temperature control is
in the OFF position.
3. Unit may not be
plugged in or plug may
be loose.
4. House fuse blown or
tripped circuit breaker.
5. Power outage.
1. Room or outside
weather is hot.
2. Unit has recently been
disconnected for a
period of time.
3. Large amounts of
warm or hot food have
been stored recently.
4. Door is opened too
frequently or long.
5. Door may be slightly
open.
6. Temperature Control
is set too low.
7. Door gasket is dirty,
worn, cracked, or
poorly fitted.
Temperature Control is
set too cold.
1. Temperature Control
is set too warm.
2. Door is kept open too
long or is opened too
frequently.
3. Door may not be
seating properly.
4. Large amounts of
warm or hot food
may have been stored
recently.
5. Appliance has recently
been disconnected for
a period of time.
1. Use another circuit. If you are unsure
COMMON SOLUTION
about the outlet, have it checked by a
certified electrician.
2. See Temperature Control Section.
3. Ensure plug is tightly pushed into
outlet.
4. Check house fuse or circuit breaker.
5. Check house lights. Call local Electric
Company.
1. It is normal for the appliance to work
harder under these conditions.
2. It takes 4 hours for the unit interior to
cool down completely.
3. Warm food will cause unit to run
more until the desired temperature is
reached.
4. Warm air entering the interior causes
it to run more. Open door less often.
5. See Door Will Not Close in this Before
You Call Section.
6. Set control to a warmer setting. Allow
several hours for the temperature to
stabilize.
7. Clean or change gasket. Leaks in the
lid seal will cause unit to run longer in
order to maintain desired temperature.
Adjust the control to a warmer setting.
Allow several hours for the temperature
to stabilize.
1. Adjust control to a colder setting. Allow
several hours for the temperature to
stabilize.
2. Warm air enters the appliance every
time the door is opened. Open the lid
less often.
3. See Door Will Not Close in this Before
You Call section.
4. Wait until the appliance has had
a chance to reach its selected
temperature.
5. Freezer mode requires 4 hours to cool
down completely after appliance is first
plugged in.
14
2021-04-19 오후 5:44:57
