Idiomas disponibles
Idiomas disponibles
EN
DIPSWITCHES FUNCTIONALITY
PA 100 MX incorporates some features that can be configured through dipswitches block. Please, check
the following table and individual specification for each function.
DIPSWITCH
SW 1
SW 2
SW 3
SW 4
SW 5
SW 6
SW 7
SW 8
SW 9
SW 10
70V OR 100V WHEN HIGH IMPEDANCE IS SELECTED
MIC FEEDBACK
SUPRESSOR
MIC GAIN SETTING
MIC INPUT PRIORITY
LOW IMPEDANCE
MODE INPUT
HIGH IMPEDANCE
MODE
FUNCTION
NOT USED
NOT USED
FEEDBACK SUPRESSION
MICROPHONE GAIN SETTING
NOT USED
MIC PRIORITY STATE
STEREO / MONO INPUT
OFF
1st
2nd
3rd
OFF
+ 6 dB
+ 10 dB
+ 15 dB
DISABLED
ENABLED
MONO
STEREO
70V
100V
MIC feedback supressor incorporates 3
presets and disable state.
The 1st preset corresponds to the most
high antifeedback level
MIC gain setting incorporates 3
levels and disable state.
MIC Priority allows to enable the priority
in the mic input and to mute the audio signal
in the LINE input.
In stereo mode, the left channel signal
is output from SPEAKERS A terminals
and the right channel signal is output
from SPEAKERS B terminals.
Once selected the high impedance mode
with the switch (15), use this dip to select
the output type (70V or 100V).
PAGE 6
User Manual / Manual de uso
DIP switch body
PA 100 MX
