Idiomas disponibles
Idiomas disponibles
1. BEFORE WELDING
Auto-Darkening welding helmet is designed to protect the welders eyes from harmful radiation
including visible light, ultraviolet radiation (UV) and in f r a - r e d r a d i a t i o n ( IR) r e s u l t ing f rom cer
tain arc and gas we ld in g cesses when used in accordance with these User Instructions.
This welding helmet is suitable for all types of electro-weldings: covered electrodes, MIG/MAG,TIG/WIG,
plasma welding,cutting and laser welding (only selected models with two shade ranges i.e.5-8 and
9-13), except for gas welding.
•
Never place the helmet or the lter on hot surface.
•
Use only within the temperature range of -10°C to+60°C.
•
Do not immerse the lter (auto-dakening lter) in water.
•
Do not expose the lter to liquids and protect it from dirt.
•
Regularly replace the cracked-scratched protection cover lens. If this helmet doesn't darken upon
striking an arc, stop welding immediately and contact your supervisor or your dealer.
2. MARKINGS
The lter is marked with the shade range and optical classi cation. The following is an example(EN379)
:vvvv v
Dark shade DIN9-13
Make sure to remove any additional protection foil
from both sides of Protection Lens .
4
/
/
9-13 SWG 1 1 1 2/EN379 CE
l
01
SWEISSWELD.COM
/ / /
