Tabla de contenido
Desk Mounting
Mounting Surfaces Less Than 2.36 Inches Thick
1. Loosen the Hand Screw, located on the Pole Assembly,
until the Desk Clamp is wider than the thickness of the
Mounting Surface (e.g. Desk or Table).
2. Slide the Pole Assembly Clamp onto the Mounting
Surface. (Figure 6)
Desk Clamp
Mounting Surface
3. Tighten the Hand Screw, located on the Pole Assembly, by
hand or by using the 5mm Hex Key, until hand-tight.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 6
8
Tabla de contenido
