Idiomas disponibles
Idiomas disponibles
COOKTOP OPERATION
Cooktop Operation
SINGLE ELEMENT AND INNER ZONE
Setting controls:
To activate a heating element, touch ON/OFF for the
1
desired single element on the control panel. Power level
indicator will flash and all indicators for that zone will
flash. Refer to the illustration below.
To complete the activation, touch HI for highest heat,
2
SIM (MLT) for lowest heat, BOOST (induction) to activate
boost mode, or touch desired power level indicator.
To change heat setting while the element is on, touch or
3
slide to desired power level.
To turn element off, touch ON/OFF.
4
For induction cooktops only, if no
IMPORTANT NOTE:
cookware or an incompatible pan is placed on an induction
element after activation, the control will flash for 30 sec-
onds, then the element will turn off automatically.
ON/OFF
Element activation.
BOOST MODE (INDUCTION)
For induction cooktops, boost mode boosts power on one
element by diverting power from an adjacent element. If
the adjacent element is on high, the power output will be
reduced. The reduction in power will be displayed on the
power level indicator of the adjacent element. Refer to the
illustration below.
will illuminate when an element is in
boost mode.
Boost mode will deactivate automatically after 30 minutes of
continuous operation and can be reactivated if desired.
BOOST
Boost mode.
|
wolfappliance.com
11
